Attach Slobber Straps

1. Locate the metal ring on either side of the horses bridle. The rings are located on either end of the bit and rest against the side of the horse’s mouth.
2. Slip one of the slobber straps into one of the rings on the bridle. Pull half of the straps through the ring and fold it in half so the ends meet.
3. Put the second strap through the other bridle ring and fold it in half like you did with the first. Both straps should be pointing down to the ground.
4. Push the smaller end of the reign through the left slobber strap from the upper side. The reign should pass through the slit in each half of the strap.
5. Pull the reign all the way through the strap leaving eight inches of strap hanging out the top of the strap. Pass the remaining eight inches around the strap and tie a knot to secure the reign to the strap.
6. Pass the loose end of the reign through the underside of the right strap. Pull eight inches of the reign through the right strap.
7. Loop the eight inches of reign on the right strap around the strap to knot the reign in place.